Auto Start Stop and Automatic Mains Failure

easYgen-3400 P2 (črna, z 8 vtiči): 8923-1919 easYgen-3500 P2 (zelena, z 8 vtiči): 8923-1918 LS-521 (pritrditev na vrata): 8928-7286 LS-511 (montaža na zadnjo ploščo): 8928-7336
Enhanced communication easYgen-2200/-2300: 8928-7286
easYgen-800/1700/1800: 10-004-675 easYgen-1500: 8923-1055
easYgen-600/1600: 10-004-674 easYgen-400/1400: 10-009-352 easYgen-350/X: 8923-1158 DTSC-50: 8923-1158
DTSC-200 8923-1805 DSLC-2: 8923-1806
easYprotec 1410: 8923-2139 IKD: 10-015-874
MFR-300: 8923-2139 SPM-D2: 8923-1032 protection.

Auto Start Stop

Automatic Mains Failure

test

	AMF	AMF	AMF	AMF
	easYgen-1400	easYgen-1600	easYgen-1700	easYgen-1800
Display	Monochrome	Monochrome	Monochrome	TFT LCD
resolution	(132 x 64)	(132 x 64)	(240 x 128)	4.3” (480 x 272)
Digital Inputs	3	5	8	8
Digital Outputs	6	6	8	8
Analog Inputs	4	3	5	5
Interfaces:
CANJ1939
USB
RS-485
SD-Card Slot
Ethernet
Power Supply: 8-35VDC
Operating Temp: -25 ... +70°C
Measuring
Generator voltage (3-phase/4-wire)
Generator current (3x TrueRMS)
Mains voltage (3-phase/4-wire)
Earth current (1x TrueRMS)
Control
Mains supply monitoring and automatic changeover
GCB and MCB control	GCB/MCB	GCB/MCB	GCB/MCB	GCB/MCB
Start/stop sequence for diesel and gas engines	Diesel	Diesel	Diesel/Gas	Diesel/Gas
Isolated single unit operation
AMF (Automatic Mains Failure operation)
Stand-by operation
Open transition (break-before-make)
ATS (Automatic Transfer Switching)
Remote monitoring and control (modem support)
Protection
Generator: voltage
Generator: frequency
Generator: loss of phase
Generator: phase sequency
Generator: current
Generator: reverse power
Generator: overload
Generator: earth fault
Mains: voltage
Mains: frequency
Mains: loss of phase
Mains: phase sequency
Engine: over speed
Engine: under speed
Engine: loss of speed
Engine: crank disconnect
Battery voltage
Display customizable power-up text and image
Display configuration with PIN protection
Counters: operating hours/start/maintenance
kWh, kvarh
Real Time Clock
Event recorder	50	50	99	99 (+SD card slot)
Switchable parameter set
Magnetic Pickup
environmental protection: IP65
compliance: CE, UL/cUL
Panel Cut-Out	116 x 90	186 x 141	214 x 160	214 x 160
	8440-2251	8440-2253	8440-2256	8440-2255

1 Rele "Pripravljen za delovanje".

Automatic Mains Failure Control - easYgen1000 Series

The Woodward easYgen-1000 series is designed for a single-generator set used in critical stand-by or prime power applications with automatic changeover capability. The controllers include purpose-built algorithms and logic to start, stop, control, and protect the genset, open/close circuit breakers and mains supply monitoring with automatic changeover. Equipped with state-of-the-art communication interfaces, Woodward’s easYgen-1000 Series of AMF genset controllers provides exceptional versatility and value for OEM genset packagers.

Dodatki

ToolKit SC

The easYgen 100 and 1000 Series require the “ToolKit SC” (different than the “ToolKit” for the easYgen3000 Series)

Toolkit SC

Annunciator – easYlite 200

- for easYgen-100/1000 Series
- 16 freely configurable LEDs
- CAN bus interface
- RS-485 interface
- Self check features

Preklopna relejna logika

- 2 kWh števca (maks. 1012 kWh)
- 8 relay outputs
- Komunikacija CANopen / Modbus

Product Specification

Spare connectors

- Spare Connector KIT EG-400/1400: 10-009-352
- Spare Connector KIT EG-600/1600: 10-004-674
- Spare Connector KIT EG-800/1700/1800: 10-004-675