自动转换开关 (ATS)
DTSC
DTSC-200A | |
---|---|
LS-6 需要远程面板显示器 | |
LS-521 | |
LS-522 | |
LS-6 XT | |
可能的断路器数量 | |
与 easYgen3400XT 和 3500XT 兼容(需要软件版本 >2.10.x) | |
兼容群控 | |
同步正向和反向 | |
负载分担的分段控制 | |
远程可选择的断路器转换模式:打开、关闭、间 | |
变化,无限平行。 | |
闭合断路器转换(短并联 | |
保护元件(包括 ROCOF、相移和灵活限制 | |
用于自定义保护) | |
用于远程控制和可视化的 RS-485 接口 | |
电报映射器 | |
用于远程控制和可视化的 CAN 接口 | |
用于远程控制和可视化的以太网接口 | |
(* 需要 ESENET) | |
冗余 CAN + 以太网 | |
(* EKS CAN 光纤) | |
冗余以太网 + 以太网 | |
没有 easYgen3000XT 的同步检查操作 | |
相位角补偿 | |
应用程序中的最大断路器(包括组控制器和 easYgen3000XT) | |
在云中收集运营数据,例如能耗、运行时间、温度等。 |
Automatic Transfer Switch (ATS) Controller - DTSC-200A
The DTSC-200A (Digital Transfer Switch Control) controls the transfer of electrical power from one source to another for hospitals, data centers, office buildings, manufacturing plants and similar where lights out is not an option. The extremely versatile DTSC-200A ATS controller is easily configured for a wide range of automatic transfer switch applications including Main-Gen, Gen-Gen or Main-Main systems using circuit breakers or latch-ing contactors. Source transfer can be performed as open, delayed, or closed transition with in-phase monitor-ing (synch check) that can be enabled for all transition types to ensure safe transfer. The closed transition over-lap time can be limited to less than 100ms for momentary, make-before-break transfers, or extended indefinitely for paralleling via discrete input. “Custom” features like transfer inhibit, source selection, load shed/restore, ele-vator pre-signal and engine test programs come standard.
配件
工具包
configuration via Woodward’s standard Software Toolkit.
USB配置接口
USB端口配置界面。 PC/笔记本电脑侧通过电流隔离与伍德沃德单元侧分离。
Only needed for DTSC-50 and the old DTSC-200. The DTSC-200A works via a market standard USB-Mini connection.
零件编号:5417-1251