測定と保護
同期
-
- 発電機サーキットブレーカ
- 主回路ブレーカー
ジェネレーターグループブレーカー
ランアップ/ブラックスタート | 発生器 | |
---|---|---|
エンジン | ||
メイン | ||
ハードウェア | ||
CANBusポート | ||
RS485 | ||
イーサネットModbusTCPポート 無料の構成可能なPID(例:速度と電圧バイアス) | ||
バスバーセンシング、メインセンシング | 2 | 4 |
690VACセンシング | ||
主電流検知 | ||
2 kWh counters (max. 1012 kWh) | ||
2相 | ||
3相 | ||
デジタル入力 デジタル出力 | ||
アナログ入力 | ||
リモートコントロールと視覚化のためのCANインターフェース | ||
アナログ出力 | ||
kWhおよびkVArhのPWM出力 | ||
CANおよび/またはイーサネットを介した負荷分散 | ||
イーサネットおよび/またはCANopenを介した冗長ロードシェアリング | ||
サポートグループコントローラーLS-5およびLS-6XT | ||
負荷に依存するスタートストップ | ||
輸出入管理 | ||
レンタル機能:4つの切り替え可能なパラメーターセット、請求用の追加カウンター、… | ||
作動温度 | ||
-40°C〜 +70°C | ||
部品番号 | ||
3100XTパッケージ1レンタル | ||
3400XTパッケージ1レンタル |
MFR-300 Multifunction Relay / Measuring Transducer with CANopen / Modbus Communication
The MFR 300 is a measuring transducer for monitoring single- and three-phase power systems. The MFR 300 has both voltage and current inputs for measuring an electrical power source. A digital processor makes it possible to accurately to measure true RMS values, regardless of harmonics, transients or disturbing pulses. The primary measured and calculated values are transmitted via CANopen / Modbus protocol to a supervisory control system.
The MFR 300 performs monitoring functions for mains decoupling, including four freely configurable time-dependent undervoltage monitoring functions for FRT (fault ride-through).
The primary measured values of voltage and current are used to calculate the real, reactive, and apparent power and the power factor (cosphi) values.
付属品
Toolkit
configuration via Woodward’s standard Software Toolkit.
USB configuration interface
USB port configuration interface. The PC/laptop side is seperated from the Woodward unit side through galvanic isolation.
part number: 5417-1251